home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / hc0308.zip / README < prev    next >
Text File  |  1991-03-08  |  4KB  |  80 lines

  1.  
  2. Notes on HamComm:                              Paderborn, March 8th 1991
  3.  
  4. - HamComm is not public domain and it is not shareware: it's FREEWARE,. 
  5.   The author keeps the copyright and all other rights.
  6.   You are NOT allowed to:
  7.     - make any modifications to the program
  8.     - distribute the program without this file
  9.     - take more than $10 for distribution including all costs
  10.   You ARE allowed to:
  11.     - use this program freely for any non-commercial purpose
  12.     - make as many copies as you like and give them away
  13.   You don't have to register, don't have to pay anything and i don't
  14.   expect any donations.  If you like HamComm tell your friends about it.
  15.   If you don't, tell me why.
  16.  
  17. - HamComm is a program for ham radio communications.  In its current
  18.   state it supports reception and transmission of amateur radio teletype
  19.   signals.  The interesting thing about it is, that it doesn't require an
  20.   expensive modem.  The audio output of the transceiver is connected to
  21.   the serial port of any PC/XT/AT compatible computer thru a very simple
  22.   and low-cost circuit.  Only one IC is needed (Op-Amp LM741 or similar)
  23.   and a few diodes, capacitors and resistors.  For transmission the
  24.   speaker output is connected to the microphone input of the transceiver
  25.   thru a passive r/c filter.  Audio frequency decoding and serial/parallel
  26.   conversion is all done by the program. 
  27.  
  28. - HamComm will automatically detect the type of video adapter in use. 
  29.   MDA, CGA, EGA, VGA and Hercules are supported.  All graphics routines
  30.   are written in assembler for speed.  The graphics display functions are
  31.   not available on MDAs since the MDA has no graphics mode.  No attempt
  32.   has been made to avoid screen flicker (snow) on cheap CGAs. 
  33.  
  34. - HamComm will run on XT maschines but the graphics displays of the
  35.   input signal are more fun to watch on an AT-class maschine.  Nearly all
  36.   of the functions can also be controlled by using a mouse.  A harddisk is
  37.   not required.  All texts are written in english and the online help
  38.   function includes the schematics for the interface circuit.  There are
  39.   also predefined standard phrases, a QTH distance/direction calculator
  40.   and a callsign decoder.  Currently about 310KB of free ram is required. 
  41.  
  42. - HamComm will probably NOT run under any kind of multitasking software
  43.   like Desqview or Windows since it needs direct control of the interrupt
  44.   controller, timer chip and serial I/O hardware. 
  45.  
  46. - On startup the program automatically searches for a configuration file
  47.   called "HC.CFG".  The current directory is searched first, then all
  48.   other directories in the current "PATH" environment variable. 
  49.     A sample config file is provided.  Read it carefully and make the
  50.   required adjustments using your favourite text editor.  If you find
  51.   yourself unable to select COM1 from the PORT menue then this is the
  52.   right place to look. 
  53.  
  54. - The converter schematics are included in the online help texts.
  55.   To see them do the following:
  56.   1. Start the program,
  57.   2. Hit ALT-H to start the help subsystem,
  58.   3. Hit the letter 'O' to select topic 'Overview',
  59.   4. Hit the TAB key to select topic 'Converter' and hit return,
  60.   5. Scroll the help text using the cursor-up/cursor-down keys
  61.      and read the text.
  62.  
  63. - Option '-l43' on the commandline will switch to 43 line ega mode. 
  64.  
  65. - Option '-l50' on the commandline will switch to 50 line vga mode. 
  66.  
  67. - The author can be reached via the packet radio mailbox system.  Send
  68.   your error reports and other comments to "DL5YEC@DB0BQ".  If you have
  69.   access to e-mail then try "uunet!nixbur!schroeder.pad".  If you have
  70.   access to Usenet you can post HamComm related questions to newsgroup
  71.   "rec.ham-radio". 
  72.  
  73. - Special thanks go to OM Winfried Sowa, DL1YCE, for contribution of the
  74.   QTH locator routines, numerous hours of beta testing and many helpful
  75.   suggestions. 
  76.  
  77. Have fun!
  78.  
  79. 73 es 55 de Django DL5YEC
  80.